Origin	China
Model Number	A4V
Brand Name	HERCULES
Power	Hydraulic
Pressure	High Pressure
Standard or Nonstandard	Standard
Structure	Piston Pump
Theory	Axial Flow Pump
Usage	Oil

Charateristics:

A4v Series Pump is swash plate design and used for hydraulic transmissions in closed circuit.Flow is proportional to input speed and displacement and is infinitely variable.

Output flow increases with swivel angle from 0 to maximum value.Swivelling the pump over center smoothly changes the direction of flow.

A highly adaptable range of control and regulating devices is available for various control and adjust function.The pump is equipped with two pressure relief valve on the high pressure ports to protect the hydraulic transmission from overload.These valves also function as boost pilot valves in standard model of the A4V series.An integral auxiliary pump serves as boost and pilot oil pump.The maximum boost pressure is limited by a built-in boost pressure relief valve.

As standard,we recommend that filtration in the suction line of the auxiliary(boost) pump is considerable,two sides of the pressure lines in boost circuit can be equipped with filters if necessary.

Variable displacement pump A4V series also supplies through drive which can connect a gear pump serves as auxiliary boost pump(used for the system whose drain oil beyond 70 percent of  the output flow of the auxiliary pump),or connect a A10V variable pump,maybe it can be used to transmit a single circuit.

Ordering Example:(Please indicate the voltage value when ordering).

A4V.56.HW.1.0.R.0.0.1.B.1.AVariable displacement pump A4V,size 56,hydraulic control andMechanical serve,series 1.0,clockwise rotation,ISO 2-holeFlange and splined shaft DIN5480,with auxiliary pump and nothrough drive,filtration in the suction line of the auxiliary(boost)pump,with DA control valve,mechanically adjustablewith control lever,with pilot operated relief valve,adjustment range 25-42Mpa with pressure cut-off.

Ordering Code;

A4VS – G - 56 – HD – 1.1 – R –  0 – 0 – 1 – B – 1 –  A

⑴     ⑵  ⑶  ⑷   ⑸   ⑹  ⑺  ⑻  ⑼ ⑽  ⑾   ⑿

⑴ Pump type-----------------Variable pump

⑵ Pump Closed Circuit

⑶ Size-----------------56ml/rev

⑷ Control Divce--------Hydraulic control,pilot pressure related

⑸ Size 40

⑹ Rotation Direction(View on shaft end)---------Clockwise

⑺ Mounting Flange & Shaft end---------- 2-hole,splined shaft DIN5480, SAE Flange

⑻ With Auxiliary Pump, with Though Drive--------- With Auxiliary Pump, no Through Drive(standards model)

⑼ Filtration------standards model: Filtration in the Suction line of the auxiliary(Boost)Pump.

⑽ DA Control Valve----------Fixed setting with DA control valve

⑾ Relif Valve---------------With pilot controled relif valve adjusting range 25~45 Mpa(Standards model)

⑿ Pressure Cut-off----------With pressure cut-off